|
Up
|
| |
|
Live Chat
|
|
|
Jump To... |
|
Manufacturer:
|
|
|
|
Product Lines:
|
|
|
|
Search |
|
|
|
|
| |
SS2000I Programmable Motion Controller
 The
fully programmable SS2000I Motion Control has been designed as the ideal motion
controller for use with the SLO-SYN SS2000D6 and SS2000D12 translator drives.
You'll also find it a perfect match for most of today's standard pulse and
direction step motor drives and digital servo amplifiers. The SS2000I delivers
years of flexible and reliable operation in a wide range of two-axis and
stand-alone applications. The SS2000I controls up to two drives, one at a time,
to meet your non-simultaneous motion control system requirements found in many
X/Y table positioning and pick-and-place applications.
For ease of programmability, the SS2000I employs a subset of the RS274 CNC
programming language using X, F and G codes programmed through the RS232 or
RS485 serial port. The SS2000I also includes MS2000, a simple, menu driven, PC
based programming environment. For added flexibility, the SS2000I also provides
subroutine and looping capabilities, nestable to 4 levels, and breakpoint
programmability, based upon changes in velocity, position or time.
Features
 | Programmable 1 or 2 axis (one at a time) motion control
| Full featured high level programming
| Subroutines and loops nestable to four levels
| Breakpoint programming allowing velocity changes as a
function of velocity, position, time, or the state of an input
| Programmed with included MS2000 programming software
| Removable static memory for occasional program changes or
firmware updates
| Optional plug-in module for closed-loop encoder feedback
| Mark registration cycle (Index From Run) repeatable within
+/-1 microstep
| Fast mechanical homing cycle
| 13 programmable plus 3 dedicated high speed inputs
| 8 programmable outputs with short circuit protection
| Single-point I/O with removable screw clamp terminal strips
| Switch selectable sinking or sourcing I/O
| Interfaces to optional BCD switches (2 banks of 7 digits
and sign) to read move distance, feedrate, and other parameters
| Interfaces to standard OPTO-22 expansion I/O boards
| Flexible 90 to 265 VAC, 50/60 HZ input with built-in line
filter
| UL recognized |
| | | | | | | | | | | | | | | |
|
