|
 |
     |
|
 |
 |
| |||||||
|
NEMA Size 17
|
| Part # | Motor Length (inches) |
Holding Torque (oz- in) |
Leads | Step Angle |
Volts | Amps | Ohms | mH | Rotor Inertia (oz- in²/G-CM²) |
Motor Weight (Lbs.) |
|---|---|---|---|---|---|---|---|---|---|---|
| HT17-068 | 1.3 | 22.2 | 8 | 1.8 | 4.0 | .95 | 4.2 | 2.8 | .190/35.0 | .44 |
| HT17-069 | 1.3 | 22.2 | 8 | 1.8 | 9.6 | .40 | 24 | 15 | .190/35.0 | .44 |
| HT17-070 | 1.3 | 22.2 | 8 | 1.8 | 12.1 | .31 | 39 | 22 | .190/35.0 | .44 |
| HT17-071 | 1.54 | 36.1 | 8 | 1.8 | 4 | 1.2 | 3.3 | 3.6 | .29/54.0 | .57 |
| HT17-072 | 1.54 | 36.1 | 8 | 1.8 | 6 | .8 | 7.5 | 7.6 | .29/54.0 | .57 |
| HT17-073 | 1.54 | 36.1 | 8 | 1.8 | 12 | .4 | 27 | 30 | .29/54.0 | .57 |
| HT17-074 | 1.54 | 36.1 | 8 | 1.8 | 24 | .2 | 120 | 107 | .29/54.0 | .57 |
| HT17-075 | 1.85 | 44.4 | 8 | 1.8 | 4 | 1.2 | 3.3 | 3 | .37/68.0 | .73 |
| HT17-076 | 1.85 | 44.4 | 8 | 1.8 | 6.8 | .8 | 8.5 | 9.5 | .37/68.0 | .73 |
| HT17-077 | 1.85 | 44.4 | 8 | 1.8 | 12 | .4 | 30 | 29 | .37/68.0 | .73 |
| Part # | Motor Length (inches) |
Holding Torque (oz-in) |
Leads | Step Angle |
Volts | Amps | Ohms | mH | Rotor Inertia (oz-in²/G-CM²) |
Motor Weight (Lbs.) |
|---|---|---|---|---|---|---|---|---|---|---|
| 5017-006 | 1.34 | 15 | 6 | 1.8 | 4.0 | .95 | 4.2 | 2.5 | .104/19.0 | .40 |
| 5017-007 | 1.34 | 15 | 6 | 1.8 | 9.6 | .40 | 24.0 | 16.0 | .104/19.0 | .40 |
| 5017-008 | 1.34 | 10 | 6 | 1.8 | 12.0 | .16 | 75.0 | 38.0 | .104/19.0 | .40 |
| 5017-009 | 1.54 | 22 | 6 | 1.8 | 6.0 | .80 | 7.5 | 6.5 | .147/27.0 | .52 |
| 5017-010 | 1.54 | 22 | 6 | 1.8 | 12.0 | .40 | 30.0 | 28.0 | .147/27.0 | .52 |
| 5017-011 | 1.54 | 22 | 6 | 1.8 | 24.0 | .20 | 120.0 | 105.0 | .147/27.0 | .52 |
| 5017-012 | 1.85 | 30 | 6 | 1.8 | 4.0 | 1.20 | 3.3 | 2.8 | .191/35.0 | .66 |
| 5017-013 | 1.85 | 30 | 6 | 1.8 | 6.0 | .80 | 7.5 | 5.8 | .191/35.0 | .66 |
| 5017-014 | 1.85 | 30 | 6 | 1.8 | 12.0 | .40 | 30.0 | 26.0 | .191/35.0 | .66 |
*Part numbers listed are for single shaft. To order double shaft add `D' to the end.
Drawing
|
