|
 |
     |
|
 |
 |
| |||||||
|
5560 Pulse & Direction
|
 |
Accepts 24-60 VDC motor supply (including ripple) |
|
1.0 - 5.5 amps/phase motor current |
|
DIP switch selectable current from 16 levels |
|
200, 400, 800, 1000, 1600, 2000, 3200, 4000, 5000, 6400, 8000, 9000, 10000, 12000, 12700, 12800 steps/rev |
|
thermal protection |
|
overvoltage protection |
|
short circuit protection |
|
built in heat sink |
|
screw terminal connectors |
|
inaudible 20 kHz MOSFET PWM amplifiers |
|
optoisolated inputs |
|
250 kHz max input frequency |
|
automatic idle current reduction (defeatable) |
|
drives 4, 6 or 8 lead step motors, sizes 14 - 42 |
|
enable input |
Description
The
5560 step motor driver contains a microstep sequencer, two switching amplifiers,
optoisolation circuits and protective circuitry. This driver also includes an
automatic feature to lower motor current anytime the motor is left at rest for
more than one second.
The amplifiers regulate motor current by chopping at a constant, inaudible frequency. Phase current is selected from 16 levels by DIP switches. Step resolution is selected by a bank of 4 DIP switches.
The 5560 is a PC board mounted on an aluminum chassis with integral heat sink. Drive can be mounted on 3" x 6" (finned) side or 2" x 6" (flat) side.
Microstep resolutions other than those listed above can be programmed for your specific application.
|
reduced current (0.3-1.6 A/phase) model 5560 L. |
Block Diagram
|
Features: